Pass0.0
- Quality of DC Calibration based on Pass0 data
Run 19341 and 19700 were calibrated with many efforts. Using their parameters
19 runs have been checked.
I. Residual resolution
II. Hits per TBT
III. chisquare of fits
- DC Calibration have been done for 16 runs(before Pass0):
19743(a, b),
19740(a, b),
19737(a, b),
19740(a, b),
19711(a, b),
19694(a, b),
19672(a, b),
19660(a, b),
19583(a, b),
19541(a, b),
19514(a, b),
19496(a, b),
19476(a, b),
19425(a, b),
19392(a, b),
19341(a, b).
Click on 'a' and 'b' inside the parenthesis and check the quality of the calibration. Here the 'a' means after the first time DC calibration and 'b' means before.
- Some recooking data after the DC calibration could be found at:
/cache/home/clasg6/cooked/pass-0.x/bit3 (for trigger bit3 data only)
- Plot from PID(for trigger bit3): ratio of different particles.
Plots from photon_mon and pid_mon
DC Calib_0 vs. DC Calib_1
Back to E99-005 main page
|