From GlueXWiki

Contents 1 Calorimeter Design review 19/20th of February 2008 2 Meetings 3 Ongoing Activities 3.1 Scintillation Fibers 3.2 Readout 3.3 Monte Carlo 3.4 Electronics 3.5 Beam tests 3.6 Pb Sheet Widths 3.7 BCAL Construction and Mechanical Issues 4 Action Item Tracker 5 Archives

Calorimeter Design review 19/20th of February 2008

Meetings

• Calorimetry Meetings

Ongoing Activities

Scintillation Fibers

• Documents
  • Spectral response of scintillating fibres GlueX-Doc 1072-v2
  • Scintillating Fiber Measurements First Look GlueX-Doc 1008-v2

• Experimental Tests
  • Kuraray No of pe - April 2, 2009
  • Kuraray Fibre Tests - March 19, 2009
  • Fiber Specs
  • Fiber Spectra - Regina, February 2008
  • Fiber Test Stand at JLAB
    • Fiber Test with SiPM
    • CAEN V792N ADC
    • Monte Carlo Simulation of collimated Sr90 source
    • Fiber Test Results K
    • PMT Response linearity test
    • First Look at First Article Fibers
    • JLab First Article Tests
    • Summary of First Article at JLab Attenuation Length and Number of Photoelectrons at 200 cm from 90Sr source
  • Fiber Tests at Regina

Readout

Roadmap toward a decision for Bcal Readout

Light Guide Information

Monte Carlo

• BCAL Stand-Alone Monte Carlo - energy resolution
• BCAL Low-Energy Photon Response
• Sampling Fraction Fluctuations GlueX-Doc 827-v3

Electronics

• Alberta CFDs

Beam tests

• Beam/Cosmics Tests
• Analysis of the BCAL Hall-B Beam test GlueX-Doc 804-v5

Pb Sheet Widths

• BCAL_Pb_Sheet_Widths
• BCAL_Pb_Sheet_Widths Revised

BCAL Construction and Mechanical Issues

• BCAL Mechanical Meetings

Action Item Tracker

• Bcal Action Item Tracker

Archives

GlueX-notes: 985, 986, 987 and 989 document the Barrel Calorimeter as per the February 2008 Calorimeter Review.

• Documents in Preparation
• Current/Up-to-date Documents
• Reference Documents
• Obsolete/Outdated Documents