[7] Magnets/Vacuum System

AUTHOR/CARETAKER: George Biallas (biallas@jlab.org) Phone: 757-269-7535
DATE: 11/11/96 (dag)
REV: 2

Magnets/Vacuum System

[7.1] General Information Menu
[7.1.1] ES&H Issues
[7.1.2] System Overview

[7.1.2.1] IRFEL Layout

[7.1.3] Requirements Documents

[7.1.3.1] DIMAD
[7.1.3.2] Tech Notes by System Physicist
[7.1.3.3] Other Requirements

[7.1.4] Testing/Performance Verification
[7.1.5] User Manual

[7.1.5.1] Procedure for Zeroing Bends at Dump Lines

[7.2] Beam Transport Meeting Minutes
[7.3] Beam Transport Schedule[PDF Format]

[7.3.1] Project Management Schedule
[7.3.2] Working Schedule for Updates

[7.4] Specific Element or System information

[7.4.1] Dipoles

[7.4.1.1] General
[7.4.1.2] Short Injection/Extraction Dipole (DU)
[7.4.1.3] Long Injection/Extraction Dipole (DV)
[7.4.1.4] Extraction Dipole after Cryomodule (DZ)
[7.4.1.5] Optical Chicane Dipole (DW)

[7.4.1.5.1] Meetings/Misc.

[7.4.1.6] 1st Reverse Bend Dipole (DX)
[7.4.1.7] 2nd Reverse Bend Dipole (DQ)
[7.4.1.8] 180 Degree Dipole (DY)
[7.4.1.9] Prototype Dipole Results 6/14/97 [In PDF Format]

[7.4.1.9.1] Longitudinal Profile
[7.4.1.9.2] After Grinding
[7.4.1.9.3] Profile 6"-Front Edge
[7.4.1.9.4] Profile 6"-Back Edge

[7.4.2] Quadrupoles, Solenoids, Sextupoles, Raster Magnets
[7.4.2.1] Injection Quadrupole (QJ)
[7.4.2.2] Low field CEBA Quadrupoles(QB)

[7.4.2.2.1] FEL Iron Quadrupole Operational Ranges {PDF Format}

[7.4.2.3] Low field Quadrupole (QG)

[7.4.2.3.1] FEL Design Quad Strength {PDF format}

[7.4.2.3.1.1] QB Magnets {PDF Format}
[7.4.2.3.1.2] QG Magnets {PDF Format}

[7.4.2.4] Trim Quadrupole (QG)
[7.4.2.5] Gun Solenoid (FA)
[7.4.2.6] Sextupole (SC)
[7.4.2.7] Gun Solenoid (FA)
[7.4.2.8] Dump Raster (FA)

[7.4.3] Correctors & Skew Quads

[7.4.3.1] Haimson Correctors
[7.4.3.2] Phasing Correctors
[7.4.3.3] Other Correctors

[7.4.4] Stands and Girders

[7.4.4.1] Stands and Girders General Layout
[7.4.4.2] Table of quantities
[7.4.4.3] Bolt Hole Layout
[7.4.4.4] Cartridge Summary
[7.4.4.5] Girder/Stand Requirements

[7.4.5] Cable Tray System

[7.4.5.1] Cable Tray System General Layout

[7.4.6] DC Power Supplies & Distribution

[7.4.6.1] DC Power Supplies & Distribution General Layout
[7.4.6.2] Shunts

[7.4.7] AC Power Distribution

[7.4.7.1] AC Power Distribution General Layout

[7.4.8] Vacuum System

[7.4.8.1] Vacuum System General Layout
[7.4.8.2] Vacuum System Review documentation
[7.4.8.3] Vacuum System Pumps
[7.4.8.4] Vacuum System Valves
[7.4.8.5] Vacuum System Table of Commercial Parts
[7.4.8.6] Vacuum System Chambers

[7.4.9] LCW, Air, N2

[7.4.9.1] LCW, Air, N2 General Layout
[7.4.9.2] LCW Requirements

[7.4.9.2.1] Non Dump LCW Requirements
[7.4.9.2.2] Dump LCW Requirements

[7.4.9.3] Air Requirements
[7.4.9.4] N2 Requirements

[7.4.10] Beam Dumps

[7.4.10.1] Beam Dumps General Layout
[7.4.10.2] Beam Dumps Review Documentation
[7.4.10.3] 10 MeV Injection Beam Dump
[7.4.10.4] 10 MeV/42 (80) MeV Extraction Beam Dump
[7.4.10.5] 42 MeV (80) Straight Ahead Dump

[7.4.10.5.1] Minutes of Meeting


Maintained by gilchris@jlab.org.