Document Control Group
Equipment - OCE 9400 B/W Printer
| Printer Names | ||||
|---|---|---|---|---|
| PRINTER NAME | USAGE | BLDG | ROOM | DRIVERS |
| cadplot4 | bond paper | ARC | 523 | JWINS1 or JLAB2 |
| cadplot4-ps | bond paper postscript files |
ARC | 523 | JWINS1 or JLAB2 |
| cadplot89 | bond paper | BLDG 89 |
89 | JWINS1 or JLAB2 |
| cadplot89-ps | bond paper postscript files |
BLDG 89 | 89 | JWINS1 or JLAB2 |
| cadplot 11 |
vellum paper postscript files |
ARC | 225 | JWINS1 or JLAB2 |
| cadplot 10 |
bond paper postscript files |
ARC | 225 | JWINS1 or JLAB2 |
|
|
||||
| Specification | |
|---|---|
| CATEGORY | TYPE |
| Media Feed | top roll 34"wide, bottom roll 22" wide manual load required media |
| Memory | 64 MB |
| Raster Data | HP-RTL, Cals type1, TIFF 6.0 G3 & G4, NIRS, C4-G4 |
| Technology | electrophotography, LED head |
| Vector Data | HP-GL, HP-GL2, CalComp 906/907, VDF, BGL, Edmics |
| Image Area Tolerance Bond | 10mm from edge of sheet to prevent trailing edge washout |
| Image Area Tolerance Vellum | 17mm from edge of sheet to prevent trailing edge washout |
| Sheet Cut Tolerance | 0 to 8mm |
|
|
|
| Standard Setup | |
| Paper Cut Sheets | ANSI E size sheet 44" x 34" ANSI D size sheet 34" x 22" ANSI C size sheet 22" x 17" NOTE: 3/8" trailing edge added to all sheet cut |
| Automatic Feed | top roll 34" wide, bottom roll 22" wide |
| ANSI B size sheet 11" x 17" vellum |
send to DCG's printer, ARC 225, dcghp1 |
| Optional | notify DCG @ 7306 if other media is required |
|
|
|
| Scanner | |
| CATEGORY | OPTION |
| Reduce or Enlarge | 25% to 400% |
| Automatic Roll Feed | 34" or 22" wide bond paper |
| Original Manual Feed Process | -load original face down in scanner -choose roll 1 or 2 to meet requirement -push scanner's green start button optional: set number of copies, zoom features optional: set trailing or leading edge optional: set machine & manually load required media |