PROCEDURE TO MOUNT, FILL A D INSERT THE HALL B TARGET STICK

The target stick (by target stick i will denote the aluminum structure
that supports the target cells) must be fixed on the brass disk connected
to the topp flange. To screw fix the oistion of the teflon base of the
stick in relation to the brass disk. Recently an aluminum plate (3 mm
thickness) with the same shape of the teflon base as been added to
increase the total lenght of the stick. Therefore the first thing to do is
to place this aluminum plate between the brass disk and the teflon base.
Even if the aluminum plate seems simmetric it must be fixed in a
particular orientation defined by a green dot on both on the brass disk
and the aluminum.
then the stick can be connected: to do this the nmr cable must be fitted
in the