Example ESPACE kumacs for FPP analysis

These espace kumacs listed below are located in /work/halla/e93027/cosmic/espace_kumac directory

fpp_cosmic.kumac

A full featured kumac which probably has more than one is interested in. The hbook created has the name fpp_offline_####.hbook . The beginning of the kumac is

macro fpp straws=on straw_eff=off ltdc=off ltdc_cor=on dist=off nhits=on ghits=on resid=on diag=off letediff=on align=on eff=on batch=off first=1 ntotal=-1 nrun=1 pol=on online=off detector=on scat_num=1

These are defaults values which enables various parts of the espace kumac to be turned on and off. These values can also be set at the espace command prompt when executing the kumac. Such as

espace> exec espace_kumac/fpp_offline straw_eff=on ntotal=100000

fpp_ltdc_front.kumac, fpp_ltdc_ch3.kumac and fpp_ltdc_ch4.kumac

Espace kumacs that create raw TDC spectra for each wiregroup in the front chamber, chamber 3 and chamber 4 respectively. They can not all be created in one kumac because it takes up too much memory. The histograms can be used to determine the zero time for each wiregroup.

fpp_demux_front.kumac, fpp_demux_ch3.kumac and fpp_demux_ch4.kumac

Espace kumacs that create raw width spectra for each wiregroup in the front chamber, chamber 3 and chamber 4 respectively. The widths are used to determine the wire that was hit within the group of eight in the wiregroup. The histograms can not all be created in one kumac because it takes up too much memory.