Settings for fpp_q05
Beam Energy            0.942 GeV
Carbon Blocks          3"+1.5" or 3"
Beam position           < 0.25 for x and y for 3A and 3B
Raster size                0.8x1.2mm
Beam Current           4mA. or maximum possible with deadtime < 40%
Target                       15cm LH2
Spectrometer settings
Spectrometer  Momentum  Angle  Collimator 
Electron  0.676 GeV  52.616°  open 
Proton  0.7556 GeV  45.265°  open
 
Magnet settings
Spectrometer  Dipole  Q1  Q2  Q3 
Electron  0.265882 T  505.460 A  289.298 A  267.479 A 
Proton  0.278876 T  565.085 A  323.425 A  299.032 A
 

The electron quads are all set to negative polarity.  The hadron quads are all set to positive polarity.   For a first guess at current for electron dipole either scale from earlier run or use 909 A/T.
 
 

Data taking
The T5 prescale should be one. The prescales for T1,T2,T3 and T4 should be set to give less than 2 Hz trigger rate for each. The T8 prescale should be set to maximum.

              The trigger setup should be proton_710_875.settings .

               The data taking time is estimated to be 6 hours. The rates is to be maximum with deadtime < 40% . Total number of triggers is 26M.