0
Settings for fpp_q08
Beam Energy            0.942 GeV
Carbon Blocks          9 inches
Beam position           < 0.25 for x and y for 3A and 3B
Raster size                0.8x1.2mm
Beam Current           20mA. or maximum possible
Target                       15cm LH2
Spectrometer settings
Spectrometer  Momentum  Angle  Collimator 
Electron  0.515684 GeV  79.830°  open 
Proton  0.99083 GeV  30.816°  open
 
Magnet settings
Spectrometer  Dipole  Q1  Q2  Q3 
Electron  0.202961 T  385.844 A  220.836 A  204.181 A 
Proton  0.365674 T  740.965 A  424.089 A  392.104 A
 

The electron quads are all set to negative polarity.  The hadron quads are all set to positive polarity.   For a first guess at current for electron dipole either scale from earlier run or use 909 A/T.
 
 

Data taking
The T5 prescale should be one. The prescales for T1,T2,T3 and T4 should be set to give less than 2 Hz trigger rate for each. The T8 prescale should be set to maximum.

              The trigger setup should be proton_875_1170.settings .

               The data taking time is estimated to be 8 hours. The rates is estimated to be 740 Hz at 20 uA . Total number of triggers is 21M .