Settings for fpp_q15
Beam Energy            3.615 GeV
Carbon Blocks          9''+6''+1.5''
Beam position           < 0.25 for x and y for 3A and 3B
Raster size                0.8x1.2mm
Beam Current           10mA. or maximum possible with < 40% deadtime
Target                       15cm LH2
Spectrometer settings
Spectrometer  Momentum  Angle  Collimator 
Electron  2.81566 GeV  22.132°  open 
Proton  1.46251 GeV  46.496°  open
 
Magnet settings
Spectrometer  Dipole  Q1  Q2  Q3 
Electron  1.10818 T  2106.72 A  1205.78 A  1114.83 A 
Proton  0.539753 T  1093.70 A  625.975 A  578.764 A
 

The electron quads are all set to negative polarity.  The hadron quads are all set to positive polarity.   For a first guess at current for electron dipole either scale from earlier run or use 909 A/T.
 
 

Data taking
The T5 prescale should be one. The prescales for T1,T2,T3 and T4 should be set to give less than 2 Hz trigger rate for each. The T8 prescale should be set to maximum.

              The trigger setup should be proton_1170_1700.settings .

               The data taking time is estimated to be 12 hours. The rates should be 1100 Hz at 10 uA. Total number triggers is 96M.