Settings for fpp_q25
Beam Energy            4.106 GeV
Carbon Blocks          all in
Beam position           < 0.25 for x and y for 3A and 3B
Raster size                0.8x1.2mm
Beam Current           100mA. or maximum possible
Target                       15cm LH2
Spectrometer settings
Spectrometer  Momentum  Angle  Collimator 
Electron  2.7738 GeV  27.10°  open 
Proton  2.068 GeV  37.67°  open
 
Magnet settings
Spectrometer  Dipole  Q1  Q2  Q3 
Electron  1.09169T  2075.38 A  1187.83 A  1098.25 A 
Proton  0.763054 T  1546.18 A  884.948 A  818.205 A
 

The electron quads are all set to negative polarity.  The hadron quads are all set to positive polarity.   For a first guess at current for electron dipole either scale from earlier run or use 909 A/T.
 
 

Data taking
The T5 prescale should be one. The prescales for T1,T2,T3 and T4 should be set to give less than 2 Hz trigger rate for each. The T8 prescale should be set to maximum.

              The trigger setup should be proton_1700-4000.settings .

               The data taking time is estimated to be 108 hours. The rates are estimated to be 800 - 1000 Hz.