Settings for fpp_q35
Beam Energy                 4.106 GeV
Carbon Blocks               all in
Beam position                < 0.25 for x and y for 3A and 3B
Raster size                     0.8x1.2mm
Beam Current                100mA. or maximum possible
Target                            15cm LH2
Spectrometer settings
Spectrometer  Momentum  Angle  Collimator 
Electron  2.24087GeV   35.92° open 
Proton   2.64172GeV  29.85 ° open
 
Magnet settings
Spectrometer  Dipole  Q1  Q2  Q3 
Electron  0.881954T  1676.66A   959.628A   887.252A 
Proton   0.974950T   1975.54A   1130.69A   1045.42A
 

The electron quads are all set to negative polarity.  The hadron quads are all set to positive polarity. For a first guess at current for electron dipole either scale from earlier run or use 909 A/T.
 

Data taking
The T5 prescale should be one. The prescales for T1,T2,T3 and T4 should be set to give less than 2 Hz trigger rate for each. The T8 prescale should be set to maximum.

             The trigger setup should be proton_1700-4000.settings .

              Estimated time for data taking is 102 hours. Estimated rate is 120 Hz.