Instructions for
reseting the "Hall C switch"
----------------------------------------------------------
1. Connect to http://hcreboot1 (
username is "apc" and password is "apc")
2. Click on the "Outlets" menu in the dark blue section of the page (
see Fig. 1) and then the "Control" submenu.
3. Then the page should change to Fig 2.
Click on the checkbox next to "8" (" Hall C switch") and then click on
menu where it says " No Action" and select "Reboot Immediate"
so that it looks like Fig. 3. Then click the
next button.
4. The page should change to Fig. 4 and click
on apply. The power to the switch will turn off/on. It may take a few
minutes.
Figure 1 (return)
![image 1](../apc_1.gif)
Figure 2 (return)
![image 2](../apc_2.gif)
Figure 3
(return)
![apc_3](../apc_3.gif)
Figure 4
(return)
![apc 4](../apc_4.gif)