| Item | Task | check\
Log Entry |
| 1 | Make sure there is no target in the beamline. | |
| 2 | Request beam with 2 uA and Fast Raster OFF. | |
| 3 | Take scans with superharps 3H00 and 3H00A. | |
| 4 | Verify that the beam size is as expected: sx= 80 um, sy = 150 um. | |
| 5 | Request Fast Raster ON: dx=+- 1 mm, dy=+- 1 mm | |
| 6 | Take scans with superharps 3H00 and 3H00A. | |
| 7 | Verify raster size | |
| 8 | Take a short run and verify that the FR and BPM signals are in the data acquisition. Verify the BPM calibration. |
| Hall C Operating Manual | |
| Last updated 11/4/99
By Jörg Reinhold (reinhold@fiu.edu) |