Slide1.JPG	Target Training
Slide2.JPG	Essential Responsibilities
Slide3.JPG	Your Job (Do's)
Slide4.JPG	Don'ts
Slide5.JPG	Experts
Slide6.JPG	Basic Components
Slide7.JPG	Target SPecifications
Slide8.JPG	Top View
Slide9.JPG	Loop Anatomy
Slide10.JPG	Goal Parameters
Slide11.JPG	Parking
Slide12.JPG	Basic Equations
Slide13.JPG	Beam Power
Slide14.JPG	Spring-03 Cryostack
Slide15.JPG	Cryostack Closeup
Slide16.JPG	Cryostat from behind
Slide17.JPG	Spring-03 Optics Sled
Slide18.JPG	Some Improvements
Slide19.JPG	New Lifters
Slide20.JPG	Hall C Layout
Slide21.JPG	Target Electronics in Hall C
Slide22.JPG	Ballast Tanks
Slide23.JPG	Gas Panel
Slide24.JPG	Recommended Studies
Slide25.JPG	4cm Tuna can boiling
Slide26.JPG	Counting room station
Slide27.JPG	Getting Started
Slide28.JPG	Main GUI
Slide29.JPG	Alarm Handler
Slide30.JPG	Charts
Slide31.JPG	Cryostat & Loop GUIs
Slide32.JPG	Check Logger
Slide33.JPG	Adjusting the Heat Load
Slide34.JPG	Lifter, Heater, & JT GUIs
Slide35.JPG	Changing Targets
Slide36.JPG	Rebooting the Target IOC
Slide37.JPG	Rebooting the Target IOC, ctd.
Slide38.JPG	Temperature, Pressure, & Fan GUIs
Slide39.JPG	Servicing Alarms
Slide40.JPG	Alarm Handler GUIs (old)
Slide41.JPG	Alarm Handler GUIs (new)
Slide42.JPG	Emergency Procedures
Slide43.JPG	Diurnal delta-P
Slide44.JPG	Archived delta-P
Slide45.JPG	Density tables vs Temperature and Pressure
Slide46.JPG	Energy Loss
Slide47.JPG	Beam Currents
Slide48.JPG	Cell Thicknesses
Slide49.JPG	Optics Targets Thicknesses
Slide50.JPG	Ortho-Para Conversion
Slide51.JPG	Optics Sled Drawing (sic)
Slide52.JPG	Cryotarget web page
Slide53.JPG	A TYPICAL SHIFT
Slide54.JPG	Done!
Slide55.JPG	Some definitions
Slide56.JPG	Machined cell target loop schematic