Water Cell | 40 cm water cell | 25 cm water cell (A1n) | ||
Label | Position (cm) | Thickness (mm) | Position (cm) | Thickness (mm) |
A | -11.43 | 1.19 | -7.62 | 2.04!!!! |
B | -6.35 | 1.15 | -5.72 | 1.51 |
C | -2.54 | 1.15 | -0.64 | 1.54 |
D | +2.54 | 1.19 | ------------ | ------------ |
E | +6.35 | 1.18 | +4.44 | 1.30 |
F | +10.16 | 1.21 | +8.26 | 1.30 |
<AF> | N/A | 1.18 | N/A | 1.41 w/o A |
<Pick-up> | N/A | 1.17 | N/A | 1.45 |
G | -13.97 | 1.10 | -8.89 | 1.48 |
H | -8.89 | 1.13 | -3.18 | 1.53 |
I | -2.54 | 1.12 | -0.32 | 1.32 |
J | +1.27 | 1.14 | +3.81 | 1.38 |
K | +10.16 | 1.12 | ------------ | -------------- |
L | +13.97 | 1.11 | +9.52 | 1.38 |
<GL> | N/A | 1.12 | N/A | 1.42 |
<Pick-up> | N/A | 1.13 | N/A | 1.41 |
****notes
1. The notes that follow the cell
thickness data also correspond to the water data.
2. There are two additional points for the 40 cm
water cell, so the two additional labels: K and L correspond to these
two points. So this implies that point F has shifted to the opposite
side of the cell. Refer to Figure 1 from the wall thickness page.
3. <AF> and <GH> are the averages for
the wall thickness measurements for each side of the cell.