Jefferson Lab Pressure and Vacuum Systems Supplement
Note: In this table of contents, links will open in new or previously opened tabs/windows.
Pressure Systems website: https://www.jlab.org/eng/pressure_systems
Part 1: General Program Information
Click here to read Part 1.
1.5 Required Documentation
Part 2: Pressure Systems Construction
Click here to read Part 2.
2.6 Use of Unlisted Components
2.8 Fabrication by Welding, Brazing, and Soldering
Part 3: Equivalent Measures
Click here to read Part 3.
Part 4: Overpressure Protection
Click here to read Part 4.
4.2 Potential Causes of Overpressure
4.3 Relief Devices Exposed to Weather
4.4 Pressure Relieving Requirements
4.5 Overpressure Protection by Relief Device
4.7 Relief Device Registration
4.8 Overpressure Protection by System Design
Part 5: Repair and Alteration
Click here to read Part 5.
5.2 Repair or Alteration of Pressure Vessels
5.3 Repair or Alteration of Relief Devices
5.4 Repair and Alteration Procedures
5.6 Repairs and Alterations Requiring Welding, Brazing or Hot Work
5.7 Examinations and Testing
Part 6: Pressure and Leak Testing
Click here to read Part 6.
6.1 Pressure and Leak Testing
Part 7: Vacuum Systems
Click here to read Part 7.
7.2 Vacuum System Categories
7.3 Requirements for Category 0 Vacuum Systems
7.4 Requirements for Category 1 Vacuum Systems
7.5 Requirements for Category 2 Vacuum Systems
7.6 Requirements for Category 3 Vacuum Systems
7.7 Requirements for Components with Thin Windows
Part 8: Operation and Maintenance
Click here to read Part 8.
Part 9: Pressure Equipment In-Service Inspection Program
Click here to read Part 9.
9.1 In-Service Inspections of Pressure Equipment
9.2 In-Service Inspection Expectations and Procedures
9.3 Procedures for Operational Inspection and Testing of Relief Devices
Part 10: Mandatory Forms
Click here to read Part 10.