|
DSG NOTES |
 |
- 2015-001 Hall B: SVT Cables
Mary Ann Antonioli - 2015-002 Hall B: Data Analysis of Reflectance Measurements Performed on the Winston Cones of the CLAS12 LTCC
Mary Ann Antonioli - 2015-003 Hall B: Reflectivity Test Station for the LTCC
Peter Bonneau - 2015-004 Hall D: Drift Chamber Gas Control System
David Butler - 2015-005 Hall B: Cable and Services Layout for the SVT Insertion Cart
Marc McMullen - 2015-006 Hall D: PLC System for the LH2 Cryotarget
Robert Werth Teachey - 2015-007 Hall B: Drift Chamber Gas System
George Jacobs - 2015-008 Hall B: Differential Line Test for the FSSR2 ASICs of the SVT
Brian Eng - 2016-001 Hall B: Module Performance of the SVT
Amanda Hoebel - 2016-002 Hall B: PID Controller Test for the Drift Chamber Gas System
Amanda Hoebel - 2016-003 Hall B: PID Pressure Control Development for Drift Chamber Gas System
George Jacobs - 2016-004 Hall B: Hardware Interlock System of the SVT
Peter Bonneau - 2016-005 Hall B: Testing of SVT Spare Modules
Amanda Hoebel - 2016-006 Hall B: Low Threshold Cerenkov Counter (LTCC) Gas System
George Jacobs - 2016-007 Hall D: Solenoid Voltage Tap Database in SQLite
Amanda Hoebel - 2016-008 HDice: Calibration Test of the CAENels CT-Box
Tyler Lemon - 2016-009 Hall D: Query Added in SQLite for the Solenoid Voltage Tap Database
Amanda Hoebel - 2016-010 HDice: Set and Readback Test of Oxford Instruments' Mercury Intelligent Power Supply
Pablo Campero - 2016-011 Hall B: Analysis of RICH Mirror Measurements
Mary Ann Antonioli, Tyler Lemon - 2016-012 DSG R&D: National Instruments cRIO-Based Controls & Monitoring, and Interlock Systems
Amanda Hoebel - 2016-013 Hall B: Interlock System of the Forward Tagger
Peter Bonneau - 2017-01 Hall B: Proposal for RICH Hardware Interlock System
Mary Ann Antonioli - 2017-02 HDice: NMR Program for Targets
Amanda Hoebel - 2017-03 HDice: Noise Test of the CAENels Current Transducer Box
Amanda Hoebel - 2017-04 Hall B: Analysis of Rotation Forces on RICH Assembly
Tyler Lemon - 2017-05 Hall B: RICH Exit Window Assembly
Tyler Lemon - 2017-06 Hall B: Torus Magnet's 325 K Cernox Error
Tyler Lemon - 2017-07 Hall B: Interlock System for the Forward Tagger
Peter Bonneau - 2017-08 Hall B: Gas Leak Study of LTCC
Marc McMullen - 2017-09 Hall B: The MVT Gas Mixing System
George Jacobs - 2017-10 DSG R&D: Test Stand for cRIO Analog Input Modules
Mary Ann Antonioli - 2018-01 Hall B: RICH Spherical Mirror Optical Tests
Tyler Lemon - 2018-02 Hall B: Measurement of the Ar/CO2 Gas Mixture Composition for the CLAS12 Drift Chambers
Amanda Hoebel - 2018-03 Hall B: Low Voltage Chassis Power Filtering for the Solenoid and Torus Magnet
Brian Eng - 2018-04 Hall B: Filtering of Torus Magnet's FastDAQ cRIO
Brian Eng - 2018-05 Hall B: Proposal for a VME Test Stand
Peter Bonneau - 2018-06 Hall B: Solenoid Controls & Monitoring System
Pablo Campero - 2018-07 Hall B: Controls & Monitoring Software of the PLC for Cooldown of Superconducting Solenoid
Pablo Campero - 2018-08 Hall B: RICH Spherical Mirror Acceptance Tests
Tyler Lemon - 2018-09 Hall B: Controls & Monitoring System to Power Up the Solenoid
Pablo Campero - 2018-10 HDice: Fabrication and Upgrades of RF Attenuation and Switching Units
Mary Ann Antonioli - 2018-11 Hall B: Software Development to Test cRIO Module 9207 and Results
Mary Ann Antonioli - 2018-12 Hall B: Design of the Gas System for the RTPC
George Jacobs - 2018-13 Hall C: PLC Software for Monitoring the UPS Units of HMS & SHMS
Tyler Lemon - 2018-14 HDice: CAENels CT-Box Current Measurement System
Peter Bonneau - 2018-15 Hall D: Callibration of the PXI System of the Solenoid
Brian Eng - 2018-16 Hall B: Power Chassis for the Mass Flow Controllers of the Gas Controls & Monitoring System
Marc McMullen - 2018-17 Hall C: Current Loop Regulation PLC Program for the HMS Quadrupoles
Amanda Hoebel - 2018-18 Hall C: HMS Vacuum Gauge
Tyler Lemon - 2018-19 Hall C: SHMS PLC Upgrades
Brian Eng - 2018-20 Hall B: Nitrogen Gas Purge System for RICH
George Jacobs - 2018-21 Hall B: LTCC Gas System Controls & Monitoring Software
Marc McMullen - 2018-22 Hall B: Gas System Controls & Monitoring Software for Micromegas Vertex Tracker (MVT) and Forward Tracker
Marc McMullen - 2018-23 Hall B: HTCC Gas System Controls & Monitorig Software
Marc McMullen - 2018-24 HDice: Noise Level of the NMR Field Sweep
Amanda Hoebel - 2018-25 Hall B: SVT Gas System Controls & Monitoring Software
Marc McMullen - 2018-26 HDice: CAENels CT-Box Current Measurement System's Device Drivers
Peter Bonneau - 2018-27 Hall B: Drift Chamber Gas System Controls & Monitoring Software
Marc McMullen - 2018-28 Hall C: Performance of PLC Control System with Controlnet and Ethernet Modules in SHMS
Pablo Campero - 2018-29 Hall A: Gas System Design for the HGC Detector
George Jacobs - 2019-01 DSG R&D: Software Development and Test Results for cRIO Module 9205
Mary Ann Antonioli - 2019-02 Hall B: Analysis of Solenoid Load Cells' Readings During Fast Dumps
Tyler Lemon - 2019-03 HDice: Attenuation Testing and Analysis of the RF Attenuation and Switching Unit
Tyler Lemon - 2019-04 Hall C: HMS and SHMS Cryogenics Remote EPICS Monitoring
Peter Bonneau - 2019-05 Hall C: Testing and Analysis of PT2026 NMR Sensor Planned for the HMS
Tyler Lemon - 2019-06 Hall C: EPICS Controls and Monitoring System Featuring Control System Studio (CSS)
Peter Bonneau - 2019-07 DSG R&D: PLC Test Station Proposal
Pablo Campero - 2019-08 Hall B: Usage of Perfluorobutane in the LTCC Detector Gas System
Marc McMullen - 2019-09 Accelerator: Population of VME Fast Shutdown Boards for the Magnet Protection System
Mary Ann Antonioli, Mindy Leffel - 2019-10 Hall B: Supply and Recovery Controls for Perfluorobutane Used in the LTCC Gas System
Marc McMullen - 2019-11 Hall C: Displaying with CSS-BOY EPICS High Voltage Process Variables of the HMS Controls & Monitoring System
Amanda Hoebel - 2019-12 Hall B: Proposed Integrated Temperature and Humidity Digital Sensor for the RICH Detector
Peter Bonneau - 2019-13 Hall A: New PLC Proposal for the Power Supply Control System of the Dipole Magnet
Brian Eng - 2019-14 DSG R&D: Software Development to Test the National Instruments cRIO NI-9265
Mary Ann Antonioli - 2019-15 Hall B: Advantage of Reusing Distilled over Recirculated C4F10 for the Gas System of the LTCC
George Jacobs - 2019-16 DSG R&D: Programming the Artix-7 FPGA to Check its Basic Functions with the Development Test Board
Tyler Lemon - 2019-17 DSG R&D: Simulation of Data Transfer Between PLC and EPICS
Pablo Campero - 2019-18 Hall C: Drop-Down Menu for High Voltage EPICS Controls & Monitoring Screens of HMS & SHMS
Amanda Hoebel - 2019-19 DSG R&D: Testing and Analysis of CAEN SY4527 and A7435SN High Voltage Modules
Marc McMullen - 2019-20 Hall C: Python Program for Backup and Restore of EPICS High Voltage Process Variables for Controls & Monitoring System
Tyler Lemon - 2019-21 DSG R&D: Choosing Between Controls & Monitoring Systems Based on PLC and Programmable Automation Controllers
Peter Bonneau - 2019-22 DSG R&D: Screens to Test the CAEN SY4527 High Voltage Power Supply System's Built-in EPICS Server
Pablo Campero - 2019-23 Hall B: Gas Controls and Monitoring for Testing the RTPC
Marc McMullen - 2019-24 Hall A: PLC Upgrade for the Power Supply Control System of Dipoles Magnets
Brian Eng - 2019-25 Hall B: Nitrogen Supply Outage to the RICH Detector - Analysis, Consequences, and Resulting Actions
Tyler Lemon - 2019-26 Hall C: Improvements to Python Program for Backup/Restore of EPICS High Voltage Process Variables for Controls & Monitoring System
Tyler Lemon - 2019-27 Hall B: Proposed Controller for the Readout of the Temperature and Humidity Digital Sensors Sensirion SHT85 Envisioned for the RICH Detector
Peter Bonneau - 2019-28 Hall B: Developing a Readout System for the Sensirion SHT85 Sensors for the RICH Detector
Peter Bonneau - 2019-29 Hall A: Locating and Testing of Hadron Calorimeter (HCAL) Cables for Super BigBite Spectrometer
Mary Ann Antonioli - 2019-30 DSG R&D: Test Results of CAEN SY4527 System Installed with A1535 High Voltage Boards
Pablo Campero - 2019-31 Hall B: Development of Data Acquisition to Read out Sensirion SHT85 Temperature and Humidity Sensors for the RICH Detector
Peter Bonneau - 2019-32 Hall A: Assembly of Electromagnetic Calorimeter (ECAL) Supermodules for the BigBite Spectrometer
Tyler Lemon - 2019-33 Hall A: Design of the Gas Distribution System for the GEM Detectors
George Jacobs - 2019-34 Hall A: Comparison of MKS and Honeywell Zephyr Series Mass Flow Sensors for GEM Detector Gas System
Brian Eng - 2019-35 Hall D: Conversion of CSS-BOY Screens to WEDM for Remote Monitoring During Operations
Tyler Lemon - 2019-36 Hall D: Switching from Phar Lap ETS to National Instruments Linux RTOS on the 8840 PXI Controller for the Solenoid
Brian Eng - 2019-37 Hall B: FPGA Upgrade Proposals for the Torus Magnet and Solenoid Control & Monitoring Systems
Peter Bonneau - 2019-38 Hall C: NPS CAEN A7030TN Module Testing
Marc McMullen - 2019-39 Hall C: Debugging NPS CAEN SY4527 Mainframes and A7030TN High Voltage Boards with EPICS CSS-BOY
Pablo Campero - 2019-40 Hall C: HMS & SHMS Magnet Screens Conversion from HMI to CSS-BOY
Aaron Brown - 2019-41 Hall B: Monitoring Software for RICH Detector Sensirion SHT85 Sensors
Mary Ann Antonioli - 2019-42 Hall C: Using GECO to Debug NPS CAEN SY4527 Mainframe and A7030TN High Voltage Boards
Pablo Campero - 2019-43 Hall B: sbRIO-based Multi-Sensor Excitation Low Voltage Chassis for the Sensor Readout of the Solenoid and Torus Magnets
Tyler Lemon - 2020-01 Hall B: sbRIO Digital Communication within the Multi-Sensor Excitation Low Voltage Chassis for the Solenoid and Torus Magnet
Tyler Lemon - 2020-02 Hall B: FPGA Command Engine Development for the RICH Detector Hardware Interlock System
Peter Bonneau - 2020-03 DSG R&D: Local EPICS Datalogger for Detector Instrumentation
Aaron Brown - 2020-04 Hall B: Proposed Compressor for Air Cooling Two RICH Detectors
George Jacobs - 2020-05 Hall A: Planned Instrumentation, Controls & Monitoring, Datalogging, and Hardware Contributions to the SoLID Solenoid
Pablo Campero - 2020-06 Hall B: Monitoring Software for Aerogel Dry Boxes for the RICH Detector
Tyler Lemon - 2020-07 Hall A: Constant Current Source Printed Circuit Board for SoLID Magnet Instrumentation
Marc McMullen - 2020-08 Hall B: Reflectivity Tests for RICH Detector's Prototype Mirror
Tyler Lemon - 2020-09 Hall B: Gas Controls & Monitoring System for the BoNuS Experiment
Brian Eng - 2020-10 Hall B: DAQ System for the Sensirion Humidity and Temperature Sensors Planned for the RICH
Peter Bonneau - 2020-11 Hall B: EPICS Monitoring of the Aerogel Storage Dry Boxes for the RICH Detector
Tyler Lemon - 2020-12 Hall B: Drift Chamber Gas System Configuration During MEDCON6
Brian Eng - 2020-13 Hall B: Summary of BoNuS Experiment's Gas System Target Purge and Fill Issues
Tyler Lemon and Brian Eng - 2020-14 HDice: Frequency-Swept NMR Program
Tyler Lemon - 2020-15 Hall C: EPICS Control System Studio (CSS) Screens for the HMS and the SHMS
Mary Ann Antonioli - 2020-16 Hall B: Upgrade of the Hardware Interlock System for the SVT
Peter Bonneau - 2020-17 Hall A: Instrumentation and Control System Drawings for SoLID Solenoid
Pablo Campero - 2020-18 Hall C: Development of LabVIEW EPICS Server for Testing CSS-BOY Magnets Screens for the HMS & SHMS
Aaron Brown - 2020-19 Hall C: Stability Testing of the NPS CAEN High Voltage Modules (A7030TN)
George Jacobs - 2020-20 Hall A: Development of Readout Electronics for the Gas Flow Sensors for the GEM Detectors
Brian Eng and Marc McMullen - 2020-21 Hall A & Hall C: Steps to Install and Run the HMI System
Pablo Campero - 2020-22 DSG R&D: Comparison of EPICS Dataloggers for Detector Instrumentation
Aaron Brown - 2020-23 DSG R&D: Test Operator Interface (OPI) Creator Program for CSS-BOY Screens
Tyler Lemon - 2020-24 Hall A: Two-dimensional and Three-dimensional Models of SoLID Magnet’s Structural Components
Pablo Campero - 2020-25 Hall A: HMI and CSS Screens for SoLID Magnet Coils and Radiation Shield Temperatures
Pablo Campero and Mary Ann Antonioli - 2020-26 Hall A: Controls & Monitoring Screens for SoLID Solenoid Neck Temperatures
Pablo Campero and Mary Ann Antonioli - 2020-27 Hall A: Controls & Monitoring Screens for the Axial and Radial Supports of SoLID’s Solenoid
Pablo Campero and Mary Ann Antonioli - 2020-28 DSG R&D: Proposed Temperature and Humidity Digital Sensors for Interlock Systems of Detector Hardware
Peter Bonneau - 2020-29 Hall A: Relay Board to Control JT Valve Motors of the SoLID Solenoid
Marc McMullen - 2020-30 DSG R&D: Overview of EPICS Control System Software (CSS) used in the Physics Division
Brian Eng - 2020-31 Hall A: Expert Controls & Monitoring Screens for Radial and Axial Supports of SoLID’s Solenoid
Pablo Campero and Mary Ann Antonioli - 2020-32 Hall A: Virtual Prototyping in NX 12 of the GEM Gas Flow Sensor Chassis
Tyler Lemon - 2020-33 Hall A: Controls and Monitoring Screens for the Cryo Control Reservoir’s Instrumentation of the SoLID Solenoid
Pablo Campero and Mary Ann Antonioli - 2020-34 Hall A: Temperature Controls and Monitoring System for the Hall A SoLID Solenoid
Pablo Campero and Mary Ann Antonioli - 2020-35 Hall C: Sensors for the Hall C Neutral Particle Spectrometer (NPS)
Peter Bonneau - 2021-01 DSG R&D: Upgrade of the Hall B Magnets' Multi-sensor Excitation Low Voltage Chassis
Peter Bonneau, Tyler Lemon, and Marc McMullen - 2021-02 Hall A: Controls and Monitoring Screens for the Valves of the SoLID Solenoid
Pablo Campero and Mary Ann Antonioli - 2021-03 Hall C: Report on the Results of the Tests Performed on the CAEN SY4527 Mainframes and A7030TN Modules for the Photomultiplier Tubes of the NPS
Aaron Brown, Mary Ann Antonioli, and George Jacobs - 2021-04 Hall A: Selection of Digital Output Pressure Sensors for the GEM Detectors
Brian Eng - 2021-05 Hall A: Pressure Control Panel for the Super Bigbite Spectrometer GEM Gas Distribution System
George Jacobs - 2021-06 Hall C: Testing Results of CAEN Modules A1535 and A7435
Mary Ann Antonioli, Aaron Brown, and George Jacobs - 2021-07 Hall A: Testing and Results for the Constant Current Source Board for the SoLID Solenoid
Marc McMullen, Peter Bonneau, Pablo Campero, and Mindy Leffel - 2021-08 Hall B: Fail-Safe Nitrogen Purge System for the RICH Dry Cabinet
Tyler Lemon - 2021-09 Hall A: Controls and Monitoring Screens for the Cryo Control Reservoir Valves of the SoLID Solenoid
Pablo Campero and Mary Ann Antonioli - 2021-10 Hall C: Development of the CSS-BOY Overview Screen for the NPS CAEN High Voltage System
Aaron Brown - 2021-11 Hall B: Optimizing the I2C bus for the RICH-II Hardware Interlock System
Tyler Lemon - 2021-12 Hall A: The Gas Flow Monitoring System for the BigBite Spectrometer's GEM Detectors
Marc McMullen, Brian Eng, George Jacobs, Mindy Leffel, and Tyler Lemon - 2021-13 Hall B: Thermal Analysis of sbRIO-9629 to be Used in the RICH-II Hardware Interlock System
Tyler Lemon - 2021-14 Hall B: Sensiron SHT-35 Sensor Board Design for the RICH II Detector
Marc McMullen, Peter Bonneau, Brian Eng, and Tyler Lemon - 2021-15 Hall C: Hardware Interlock System for the Neutral Particle Spectrometer (NPS)
Peter Bonneau - 2021-16 Hall B: Testing of the SHT35 Sensor Printed Circuit Boards for RICH II
Tyler Lemon, Peter Bonneau, Marc McMullen, and Brian Eng - 2021-17 Hall A: Evaluation of an ADC Module to be Used with the Raspberry Pi Single Board Computer for GEM Detectors
Brian Eng - 2021-18 Hall A: Controls for SoLID Magnet Valves
Pablo Campero - 2021-19 Hall C: Testing of the High Voltage Cables to be Used for the NPS Photomultiplier Tubes
Aaron Brown and George Jacobs - 2021-20 Hall B: Design of the Nitrogen Gas Purge Panel for the RICH-II Detector
George Jacobs - 2021-21 Hall C: Program for the Hardware Interlock System of the Hall C Neutral Particle Spectrometer (NPS)
Peter Bonneau - 2021-22 Hall B: Design of the Reconfigurable Input/Output Mezzanine Card for the Hardware Interlock System of Hall B’s Second Ring Imaging Cherenkov (RICH) Detector
Marc McMullen, Peter Bonneau, and Tyler Lemon - 2021-23 Hall B: LabVIEW User Interface for the Hardware Interlock System of Second Ring Imaging Cherenkov (RICH) Detector
Pablo Campero - 2021-24 Hall B: Selection of Parts for the Reconfigurable Input/Output Mezzanine Card of the Hardware Interlock System for Hall B's Second Ring Imaging Cherenkov (RICH) Detector
Tyler Lemon - 2021-25 Hall C: Fabrication of the High Voltage Supply Cables for the Neutral Particle Spectrometer (NPS) Photomultiplier Tubes
Mindy Leffel and Aaron Brown - 2021-26 Hall C: Temperature Display of the Front and Back Crystal Zones of the Neutral Particle Spectrometer (NPS)
Mary Ann Antonioli - 2021-27 DSG R&D: The EPICS User Interface for Hardware Interlock Systems
Peter Bonneau - 2021-28 Hall C: Fabrication of Cables for the Photomultiplier Tubes of the Neutral Particle Spectrometer (NPS)
Mindy Leffel and Aaron Brown - 2021-29 Hall B: The Backplane Board of the Hardware Interlock System for the Second Ring Imaging Cherenkov (RICH) Detector
Marc McMullen - 2021-30 Hall C: Development of a Database for the Neutral Particle Spectrometer (NPS)
Aaron Brown - 2021-31 DSG: Proposal to Upgrade the Experimental Physics and Industrial Control System’s Graphical User Interface to Control System Studio Phoebus (EPICS)
Brian Eng - 2021-32 Hall B: Minimum Reflected Spot Size Measurements for Hall B's Second Ring Imaging Cherenkov Detector (RICH)
Tyler Lemon - 2021-33 Hall A: Proposal for the Simulation of Rockwell’s Enhanced Proportional Integral and Derivative Controls
Pablo Campero - 2021-34 Hall B: Monitoring and Relay Controls of the Reconfigurable Input Output Mezzanine Card for the Second Ring Imaging Cherenkov Detector’s Interlock System
Marc McMullen, Peter Bonneau, and Tyler Lemon - 2021-35 Hall C: LabVIEW Program for the Keysight Switch/Measure Unit of the Neutral Particle Spectrometer (NPS)
Aaron Brown - 2021-36 Hall C: Pre-shaping of the Enhanced Specular Reflector Foil for the Neutral Particle Spectrometer (NPS)
George Jacobs, Mindy Leffel, and Aaron Brown - 2021-37 Hall C: Proposal to Implement Alarm System in Control System Studio Phoebus for the Hall C Neutral Particle Spectrometer (NPS)
Peter Bonneau - 2021-38 Hall A: Drawings for Wiring of Hall A SoLID Instrumentation
Mary Ann Antonioli and Pablo Campero - 2021-39 Hall A: Multi-Channel Remote Gas Controls System for the Hall A Gas Electron Multiplier Detectors
Brian Eng and Marc McMullen - 2021-40 Hall B: Design of a Chassis to House the Hardware Interlock System Components of Hall B’s Second Ring Imaging Cherenkov Detector
Tyler Lemon - 2022-01 Hall A: NX12 Model of the Hall A SoLID Magnet Voltage Tap Locations
Marc McMullen - 2022-02 Hall C: Ansys Steady-State Thermal Analysis of the Engineered Cooling Design for the Lead Tungstate Crystals of the Hall C Neutral Particle Spectrometer (NPS)
Aaron Brown - 2022-03 Hall C: Development of the EPICS Phoebus Controls & Monitoring System for Hall C's Neutral Particle Spectrometer's (NPS) High Voltage Channels
Aaron Brown - 2022-04 Hall B: Pressure Controls Upgrade of the Hall B Low Threshold Cherenkov Counters
Marc McMullen - 2022-05 Hall B: Engineered Hardware Interlock System for Hall B's RICH-2
Tyler Lemon - 2022-06 Hall C: Development of the EPICS Software Input/Output Controller for Testing the Phoebus Alarm System of the Hall C Neutral Particle Spectrometer
Peter Bonneau - 2022-07 Hall B: Testing of the Spherical Mirrors of the Second Hall B Ring Imaging Cherenkov Detector
Tyler Lemon - 2022-08 Hall B: Reflectivity Testing of Hall B Ring Imaging Cherenkov Detector's Spherical Mirrors
Tyler Lemon - 2022-09 EIC: Thermal Analysis of the Beryllium Beampipe at Interaction Point 6 of the Electron Ion Collider
Pablo Campero - 2022-10 Hall C: Back-potting and Testing of Cables Fabricated for the Photomultiplier Tubes of the Hall C Neutral Particle Spectrometer (NPS)
Aaron Brown, George Jacobs, and Mindy Leffel - 2022-11 Hall C: Ansys Steady-State Analysis of the Lead Tungstate Crystals of the Neutral Particle Spectrometer (NPS)
Aaron Brown - 2022-12 Hall C: LabVIEW Control and Monitoring Software for the Neutral Particle Spectrometer (NPS)
Mary Ann Antonioli and Aaron Brown - 2022-13 Hall A: Tests for the Hall A Electromagnetic Calorimeter Supermodule Heater
Marc McMullen and Brian Eng - 2022-14 EIC: Data Acquisition Proposals for the EIC DIRC Laser Test Stand
Tyler Lemon - 2022-15 Hall A: Prototype Instrumentation and Testing of Moller Coil 3
Brian Eng - 2022-16 DSG Phoebus R&D: Automated Startup and Sequencing of the CS-Studio Phoebus Alarm System Core Programs
Peter Bonneau - 2022-17 Hall A: SoLID Magnet Control and Monitoring Status
Pablo Campero - 2023-01 EIC: Design and Features of the EIC DIRC Laser Lab's Laser Interlock System
Tyler Lemon - 2023-02 Hall A: SoLID Magnet Alarm Handler and Email Notification System
Pablo Campero - 2023-03 DSG Phoebus R&D: Debugging CS-Studio Phoebus Version 4.6.10 Used for the Development of the Alarm System
Peter Bonneau - 2023-04 Hall B: Upgrading the Magnet FastDAQ system with additional Voltage Taps
Brian Eng - 2023-05 Hall C: Error Handling for the Keysight Thermal Readback System of the Neutral Particle Spectrometer (NPS)
Aaron Brown - 2023-06 DSG Phoebus R&D: Testing of the CS-Studio Phoebus Applications and Alarm System Core Programs
Peter Bonneau - 2023-07 Hall A: Standalone Stray Field Mapping Units for CLEO Solenoid
Brian Eng - 2023-08 Hall C: Testing of the Keysight Extension Cables for the Hall C Neutral Particle Spectrometer (NPS)
Aaron Brown - 2023-09 EIC: Thermal Analysis of the Electron Ion Collider’s Beryllium Beampipe Section
Pablo Campero - 2023-10 EIC: Evaluating Altium for Circuit Simulation Using the EIC-DIRC Laser Interlock Circuit
Tyler Lemon - 2023-11 Hall A: Heater Control and Monitoring for the Hall A Electron Calorimeter Test Stand
Marc McMullen